Home > Tree Removal > NSW > Bolwarra - 2320
Get Cheaper Tree Removal in Bolwarra, 2320
Last updated:
20 August 2023
The cost of tree removal in Bolwarra, 2320 varies depending on a number of factors including tree size and location.
The average tree removal cost in Bolwarra, NSW is $1,632 which is 7% expensive than the national average of $1,530
GoTreeQuotes has matched 18 users with local tree services for quoting their job so far this month
Do I need council approval for tree removal Bolwarra?
Maitland council does allow for the removal of trees in Bolwarra, NSW without council consent.
Development approval is required for the removal on trees which are; 1) Over three metres in height, or which have a branch spread of three metres or more, 2) And a trunk diameter of 100mm or more measured at 1.0m. Exempt trees include; 1) dead trees 2) Trees that are dangerous as identified by a qualified arborist 3) fallen trees 4) 10/50 fire clearance in certain areas
You can download an application form by going here
Are there certain trees exempt from above rules?
Some local councils have a list of tree species that are exempt from any limitations on removal as they are considered a pest. In Bolwarra, NSW under the local Maitland Council umbrella there are trees exempt from needing council approval before removal.
NA.Do I need a permit to prune a tree in Bolwarra, 2320 NSW?
Pruning can be carried out on trees in Bolwarra, NSW. They types of pruning allowed are as follows:
Development approval is required for the pruning of trees which are; 1) Over three metres in height, or which have a branch spread of three metres or more, 2) And a trunk diameter of 100mm or more measured at 1.0m. Exempt trees include; 1) Trimming dead wood 2) Dangerous branches as identified by a qualified arborist
Compare tree removal prices of 3 local tree companies, all voted as “best price to quality balance”. Fill out a 1 minute form and received 3 rock bottom quotes within hours.
Safety standards for accredited tree arborists in Bolwarra
Certified arborist in the Bolwarra and surrounding areas need to all abide by the Australian standards when carrying out tree management work.
These standards include:
AS 4373:2007 - Pruning of amenity trees
AS 4970-2009 - Protection of trees on development sites
How do I apply for council approval?
If you do in fact need council approval before proceeding, you will need to fill in a tree removal application form which can be found on your local councils website. Normally there will be a small fee you will need to pay upon application.
You can download an application form by going here
Within 7 - 14 days you will have an arborist from the council for Bolwarra, nsw come out to inspect your tree. They will then give their recommendation on whether the tree should be removed or if a tree prune/ lop might be better.
Author: Ben McInerney is a qualified arborist with over 15 years of industry experience. He uses his in-depth knowledge of the tree service industry to give readers to most accurate information on tree service costs and helps to educate them about the benefits of using a certified arborist for tree trimming and removal work.
